Next Generation of cardiac Monitoring Systems For Your patient

2 in 1 Functions

2 in 1″ – when purchasing PulseGrid II, you also purchase a set of TelePulse II devices, each of which can operate either as a system element (cardiac monitor) or as a classic Holter.

Monitoring is performed at any location both in the hospital or other medical facility, and a special feature of the solution enables quick response in case of unconsciousness or sudden falls of the patient.



  The telemetry mode of the PulseGrid II or PulseGrid II Oxy allows you to continuously monitor the vital functions of patients lying or moving around the hospital.
  The system provides screen monitoring of selected patients or monitoring of an unlimited group of patients based on an alarm generated by medical algorithms. Effective alarms allow for rapid intervention by medical staff


Most Important Functionalities

important system functionalities

  • ECG და SpO2 telemetry – multi-parameter cardiomonitor – PulseGrid II Oxy
  • ECG telemetry – ECG Cardiomonitor  PulseGrid II
  • Constant remote control in or out of the hospital area..

  • ECG monitoring or multi-parameter monitoring (ECG and/or SpO2)
  • Possibility to connect other vital signs monitors (e.g. blood pressure monitor)
  • Initial remote patient health assessment and prioritizing the call (medical algorithms)
  • Preview of alarms and current ECG and SPO2 waveforms in the application
  • Effective notification of cases requiring immediate intervention by medical personnel, additionally combined with information on patient location
  • Preview of historical patient tests
  • The ability to preview ECG and SpO2 on the patient’s device screen  
  • Extended view enabling an instant overview of the patient’s current and historical data
  • Possibility of calling for help and informing about bad feeling by patient
  • Patient’s location in and outside the hospital
  • Possibility of constant, multi-day observation of many patients; response of medical personnel in the event of an alarm
  • Possibility of continuous observation of selected ECG waveforms of selected patients


Most Important Technical Data

MOst Inportant SYSTEM FUnctionality

  • Access to a system from a PC or tablet from anywhere in the hospital or outside of hospital through WWW
  • 50 HZ Filter -Filter out of Electromagnetic Interface
  • Fall detection
  • Lack of electrode contact with patient’s body detection
  • Finger ejection from the SPO2 sensor detection od lack of contact of the device with the SPO2 sensor detection
  • Several types of SPO2 sensors
  • Informing the system about battery level in the device
  • Advanced medical algorithms
  • High signal quality – AC / DC converter resolution 24 BITS
  • ECG Signal accuracy: < 0.5%
  • Saturation measurement accuracy +/- 3% for 70 -100%
  • Noise level for ECG signals, 1.5 MV (RMS)
  • Weight of the device with battery:
    TELEPULSE II – 150 G
  • Device dimensions: 2.5 CM X 7.5 CM X 9.5CM
  • Device display – 1.5 inches
  • High quality warning connector Robust casing

  • Stationary or remote monitoring
  • Registration of leads , II and V. Calculation of leads AVR, AVL & AVF
  • Wireless or wired transmission
  • Continues data registration, even if patient if out of Wi-Fi range
  • Noise filtering

“We believe it took us this long to make a Fast changes “

F.A.S.T. Global Group Team®



The Holter mode of the PulseGrid II solution allows you to perform patient ECG tests lasting from 24h to even 30 days!
Thanks to advanced technologies and applied mechanisms, the Holter application guarantees a quick review and reclassification of beats and arrhythmias.
The cardiologist’s time saving is also guaranteed by remote access to the application and a reduced number of artifacts


Most Important Functionalities

Most important system functionality


  • Holter from 24 h to 30 days
  • Remote access to the Holter application from anywhere with internet access
  • Effective ECG signal analysis including accurate detection of beats and arrhythmias
  • Identification of 17 arrhythmias; Detection and analysis of ventricular and supraventricular arrhythmia classes, pauses, bradycardia, tachycardia, bigeminy, trigeminy and other cardiological events
  • Detection of atrial fibrillation
  • Morphology of ventricular beats
  • “Pattern” functionality enabling quick classification of selected beats
  • Cardiac pacemaker detection
  • Booster charts with “Pattern” functionality
  • Beats grouping – enabling quick reclassification of beats – based on “Machine Learning” mechanisms
  • QT analysis, ST analysis, HRV analysis

  • The ability to modify the scan parameters
  • Possibility of previewing the ECG on the device screen during the examination
  • The option of channel selection and rescanning
  • Option to send an “event” during a Holter examination
  • Electronic patient diary; data sent to the Holter application


Most Important Technical Data

MOst Inportant FUnctions

  • 50 HZ Filter -Filter out of Electromagnetic Interface
  • Detection of electrode contact with patient

  • Lead cables: 5-Electrode connection cable (Electrodes; LA, RA, LL, RL, V)
  • Working time one battery: 120 hours
  • High Signal Quality – AC / DC Converter resolution: 24 Bits
  • Wired Holter file transmission after the examination
  • Signal measurement accuracy: < 0.5 %
  • Weight of the device with battery: 150 G
  • Device dimensions: 2.5 CM X 7.5 CM X 9.5 CM
  • High quality warning connector Robust casing

Contact us